Food Industry Services
Korotan

The "Original" Henkelman Vacuum Packer
 Call 888-244-3415
http://www.vac-n-seal.com  http://www.CustomDrains.com
Home Contents Contact Us

Food Industry
Services

Phone:
U.S. Toll Free
888-244-3415
Outside U.S.
E-mail Us
Se habla 
Español
Up

E-mail Us

Páginas Españolas
Páginas 
Españolas

 

Contact Info:

Food Industry
Services
E-mail:
info@gcbc.net

 

KORODUR-KOROTAN Industrial Floor
hard aggregate screed according to DIN 18560

for highest mechanical and dynamic stress in one layer, nearly without joints.

Description:

KORODUR-KOROTAN industrial floor is a cement-bound KORODUR hard aggregate screed, which is applied in one operation to the hardened sub base in an average nominal thickness of 15 mm. It meets the demands of DIN 18560.

The KORODUR-KOROTAN hard aggregate screed consists of standardized factory produced high-quality KORODUR- hard aggregates, Portland cement and the KOROTAN-additive.

KORODUR-additive is a high-grade screed plasticizer with additional stabilizing properties for cement-bound screeds and especially created for the KORODUR-KOROTAN hard aggregate screed.

KORODUR-Additive

Form liquid
Color brown
Content of agent (%) 26
Viscosity (m Pas) approx. 10
ph-value approx. 9
Density at 20 degrees C (g/cm3) 1,14

The KORODUR-KOROTAN-Additive in a proportion of 2% effects the following:

bullet

plasticization of the KORODUR-KOROTAN-mortar at constant water-cement ratio

bullet

reduction of the water-cement ratio at constant consistency

bullet

stabilization of the KORODUR-KOROTAN-mortar

bullet

improvement of the inner friction factor

bullet

easier workability

bullet

optimization of the compaction

bullet

early readiness for mechanical smoothing

Properties:

KORODUR-KOROTAN hard aggregate screeds are:

bulletHighly wear-resistant
bulletResistant against high surface pressures
bulletShock-proof
bulletImpact-resistant
bulletNearly without joints
bulletAnti-slip
bulletWater-resistant
bulletFrost/Deicer resistant
bulletMineral oil resistant
bulletEasy to clean
bulletHarmless to environment
bulletHarmless to drinking-water
bulletPhysiologically harmless

Properties:

KORODUR-KOROTAN hard aggregate screeds comply to DIN 18560-ZE 65A-V15F and are applied in one layer on the hardened new resp. worn-out (capable to be restored) subbase of a strenght of >= B 25 grade.

The application is executed nearly without joints. The incorporation of KORODUR Bonding Compound provides an excellent and seamless bond between the KORODUR-KOROTAN hard aggregate screed and the concrete sub base.

Technical Data

 Techn. Data of hard aggregate
acc. to DIN 1100		 Demanded values of hard aggregate screeds acc.
to DIN 18560-ZE 65 A
acc.to DIN 1100
group A		 acc.to test report
external control
DIN 1100
KORODUR VS 0/5		 acc.to test report
external control
DIN 1100
KORODUR WH-Special		 quality test confirmation
test
Tensile strength N/mm2
2
nominal strength (smallest single value) serial strength (avg. value)		 -
min. 10		 -
11,1		 -
11,2		 -
<=9		 8
>=9
Compressive strength N/mm2
2
nominal strength (smallest single value) serial strength (avg. value)		 -
min. 80		 -
95,0		 -
80,6		 65
>=75		 -
-
Wear cm3/50 cm2
 2
nominal strength (greatest single value) serial strength (avg. value)		 max. 5,5
max. 5,0		 -
4,1		 -
2,84		 7
<=6		 -
<=7
Bulk density kg/dm3 acc. to DIN 4226 Part 3 1,68 1,84 - -
Grain size composition acc.to DIN 4226 acc to DIN 4226 acc. to DIN 4226 - -

Use:

Normal room and floor temperature provided:

Use for walking: after 3 days
Use for higher stress: after 7 days
Mechanical and dynamic full stress: after 21 days

Packaging:

KORODUR Bonding Compound 25 kg bag
KORODUR hard aggregate 50 kg bag
KOROTAN 30 kg unit
KOROTEX 33 kg unit
KOROPOX 16 kg unit

Shelf-life 6 months, to be protected from frost and heat.

Food Industry Services

Toll Free  +1 888 - 244 - 3415